Personalised Acrylic House Number Sign with Street Name – Rectangle

Make Your Address Easy to Find—and Worth Noticing

This personalised acrylic house number sign combines a clearly visible house number with your street name in a clean, modern layered design. Choose the size, design style, colour combination and fixing method to create a made-to-order address sign that complements your home.

Choose Your Design Style

• Classic – 2 Layer: A clean, streamlined design made from two contrasting acrylic layers.
• Signature – 3 Layer: An additional accent layer creates greater depth, contrast and a more detailed dimensional finish.

Every sign is precision laser-cut and carefully assembled to order in our Australian workshop.

Available Rectangle Sizes

• Small: 400 × 200 mm with a 3 mm back plate
• Medium: 570 × 285 mm with a 4.5 mm back plate
• Large: 850 × 425 mm with a 6 mm back plate

The thicker back plates used for the Medium and Large sizes provide greater rigidity, strength and stability across their larger surface areas. All raised number, street-name and accent components are cut from 3 mm acrylic.

Colour combinations featuring a metallic gold or metallic silver back plate are available only in the Small 400 × 200 mm size. The compatible colour combinations will be displayed after you select your size and design style.

Choose Your Installation Method

• 5 mm Corner Holes + Screws + Matching Acrylic Caps — Recommended: The sign is prepared with four accurately positioned corner holes and supplied with screws, wall plugs and 15 mm colour-matched acrylic caps. The 3 mm-thick caps conceal the screw heads for a clean, coordinated finish.
• No Fixings / No Holes: Supplied without holes or mounting hardware, allowing you or your installer to select an installation method suitable for your wall and location.
• Hidden Plastic Fixings: These outdoor-suitable fixings are bonded to the back of the sign, leaving the front free from visible holes or hardware. They position the back of the sign approximately 20 mm from the wall. Four correctly installed fixings are supplier-rated to support a combined weight of up to 5 kg.

  Security limitation: This clip-together system is not tamper-resistant and may be dismantled when within reach. It is recommended only when the sign is located inside private property, is not publicly accessible, or is mounted high enough to be out of reach. Silicone adhesive placed inside the caps may discourage casual removal, but it will not make the system tamper-resistant. For low or publicly accessible locations, select the corner-screw or stainless-steel standoff option.

• 304 Brushed Stainless-Steel Standoffs: A set of four brushed 304 stainless-steel standoffs creates a clean, professional floating appearance. Each standoff uses a lateral locking grub screw to help resist casual removal. Screws, wall plugs and an Allen key are supplied.
• Standoffs + Colour-Matched Acrylic Caps: The stainless-steel standoff fittings are recessed into the sign and concealed beneath 15 mm colour-matched acrylic caps. This option combines the floating appearance of standoffs with a coordinated finish that complements the acrylic layers. Screws, wall plugs and an Allen key are supplied.

Personalisation and Design Proof

Enter your house number and street name exactly as you would like them displayed. Letter sizing and spacing may be adjusted to accommodate different street-name lengths while maintaining a balanced and easy-to-read layout.

Please check all spelling, numbers and punctuation carefully before submitting your order.

A digital design proof will be sent within 48 hours of receiving your order. Please review and reply within 48 hours so production can proceed without delay. Production will begin only after you approve the design proof.

Production and Delivery Time

Once your design proof has been approved, please allow 3–5 business days for production.

The Australia Post delivery estimate displayed at checkout is additional and begins after your completed sign has been dispatched. Delayed design approval may result in a later dispatch date.

Important Installation Information

• Fixing locations must be measured and drilled accurately. Incorrectly spaced holes may prevent the sign from fitting correctly.
• If you are uncertain about measuring, drilling or selecting suitable wall anchors, we recommend engaging an experienced handyperson or professional installer.
• Wall materials and conditions vary. Always confirm that the supplied or selected screws and anchors are suitable for your mounting surface.
• Do not overtighten screws, standoffs or fittings against the acrylic. Tighten only until snug. Excessive pressure may crack or damage the acrylic.

Colour and Care Information

• Colours may appear slightly different depending on screen settings, lighting and surrounding reflections. Metallic and reflective finishes will naturally change appearance according to their environment.
• Clean the acrylic gently using a soft microfibre cloth with water or mild soapy water.
• Do not use abrasive cleaners, window cleaner, solvents or alcohol-based products on the acrylic.

Your sign will be individually laser-cut, assembled and prepared according to the size, style, colour and fixing options you select.